Toshiba e-STUDIO556 Service Manual page 1079

Sub
05/08 Mode Element
element
08 Setting System Network
Mode
08 Setting System Network
Mode
08 Setting System Network
Mode
08 Setting System Scanner
Mode
08 Setting System Scanner
Mode
08 Setting System Scanner
Mode
08 Setting System General
Mode
08 Setting System General
Mode
e-STUDIO556/656/756/856
Item Subitem
Direct SMTP
Direct SMTP
Internet Fax
Sub- Default
Code Details
code value
3810 Communication 0
setting
3811 Image encrypting at 0
the Direct SMTP
3812 Dummy full mode at I- 0
Fax transmission
3815 XPS file thumbnail 1
addition
3816 XPS file paper size 1
setting
3817 PDF file version 4
setting
3833 Home directory 0
function
3837 Display switching for 0
the machine
name/computer name
shown in the
notification
20
Acceptable
RAM Contents
value
0~1 SYS When an Internet Fax is sent, Direct SMTP
communication is set.
0: Disabled 1: Enabled
When "0: Disabled" is set, an Internet Fax is sent using
an SMTP server. When "1: Enabled" is set, direct
SMTP communication is enabled and an Internet Fax is
sent to MFPs on the intranet without using an SMTP
server. Since no SMTP server is used, the SSL
encryption and SMTPAUTH function cannot be used for
internet Fax transmission. If "1: enabled" is set in 08-
3810, set "1: Enabled" in 08-3812 as well.
0~1 SYS When Direct SMTP communication is performed, an
attached image is encrypted. 0: Disabled 1: Enabled
0~1 SYS When an Internet Fax is sent, the resolution ratio and
the paper size of an attached image are set to the full
mode.
0: Disabled 1: Enabled
If "1: Enabled" is set in 08-3810, set "1: Enabled" in 08-
3812 as well.
0~1 SYS Thumbnail is added to the XPS file produced by the
Scan function.
0: Not added 1: Only the top page added
0~1 SYS The paper size of the XPS file produced by the Scan
function is set.
0: Scanned image size 1: Standard size
0~1, 4 SYS The version of PDF file produced by the Scan function
is set.
0: PDF V1.3 1: PDF V1.4 4: PDF V1.7
0~1 SYS Function to store a file in the user's home directory.
0: Disabled 1: Enabled
0~1 SYS The display method of the machine name/computer
name shown in the event-related notification is
switched.
0: IP address 1: NetBIOS name/FQDN
Proce Servic
dure e UI
1 Yes
1 Yes
1 Yes
1
1
1
1
1