Toshiba e-STUDIO556 Service Manual page 125

[E] Call for Service
(1) When the tandem LCF tray-up sensor (S44) is not turned ON even though the specified period of
time has passed since the tray started to be raised, it is assumed that the drawer is not
operational and the corresponding message is displayed on the control panel.
(2) When the tandem LCF bottom sensor (S42) is not turned ON even though the specified period of
time has passed since the tray started to be lowered, it is assumed that the drawer is not
operational and the corresponding message is displayed on the control panel.
(3) When the end fence stop position sensor (S75) is not turned ON even though the specified
period of time has passed since the end fence started to move the paper in the standby side tray,
it is assumed that the tandem LCF is not operational and the corresponding message is
displayed on the control panel.
(4) When the end fence home position sensor (S73) is not turned ON even though the specified
period of time has passed since the end fence started to move the paper in the standby side, it is
assumed that the tandem LCF is not operational and the corresponding message is displayed on
the control panel.
(5) The states (1) to (4) are cleared by turning the power OFF and solving the problems.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
3 - 79
OUTLINE OF THE MACHINE
3