Toshiba e-STUDIO556 Service Manual page 1083

Sub
05/08 Mode Element
element
08 Setting Printer Paper feeding
Mode
08 Setting Printer Paper feeding Automatic change of
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Paper feeding Automatic change of
Mode
e-STUDIO556/656/756/856
Item Subitem
Auto
paper source
When a drawer is
paper source specified
Sub- Default
Code Details
code value
4010 Default setting of 0
paper source
4011 PPC 1
4012 Pre-running rotation 0
of polygonal motor
4013 Polygonal motor 0
rotational status
switching at the Auto
Clear Mode
4014 Rotational status of 0
polygonal motor on
standby
4015 Timing of auto- 3
clearing of polygonal
motor pre-running
rotation
4016 0 PPC 0
24
Acceptable
RAM Contents
value
0~6 SYS 0: A4/LT 1: Tandem LCF 2: 1st drawer 3: 2nd drawer 4:
3rd drawer 5: 4th drawer 6: Option LCF
1~2 SYS Sets whether or not changing the drawer automatically
to the other drawer with the paper of the same size
when paper in the selected drawer has run out.
1: Only in the same paper direction
2: In both the same and different paper directions
0~2 SYS Sets whether or not switching the polygonal motor from
the standby rotation to the normal rotation when the
original is set on the RADF or the platen cover is
opened.
0: Valid (when using RADF and the original is set
manually)
1: Invalid
2: Valid (when using RADF only)
0~1 SYS Sets whether or not switching the polygonal motor from
the normal rotation to the standby rotation at the Auto
Clear Mode. 0: Valid 1: Invalid
0~1 SYS Sets the rotational status of polygonal motor on
standby.
0: Rotated (The rotation speed is set at 08-4004.)
1: Stopped
0~6 SYS This setting to switch the polygonal motor to the
standby rotation when a certain period of time has
passed from the pre-running. In this code, the period of
time to switch the motor status to the standby rotation is
set.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec. 5:
40 sec. 6: 45 sec.
* This setting is enabled when "0" or "2" is set in 08-
4012 and also "0" is set in 08-4013. The rotational
status in the ready status can be set in 08-4014
0~1 SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when coping.
0: Does not change the paper source automatically
1: Changes the paper source automatically
Proce Servic
dure e UI
1
1 Yes
1
1
1
1
4 Yes