Toshiba e-STUDIO556 Service Manual page 246

(6) Take off the shaft of the separation finger by
sliding it to the front side.
(7) Remove 1 E-ring [1] and spring [2]. Take off
the separation finger [3] at the front from the
shaft.
(8) Remove 1 screw. Take off the separation
finger holder [1] at the front from the shaft.
(9) Remove 1 E-ring [2] and spring [3]. Take off
the separation finger [4] (in the middle) at the
front from the shaft.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Fig. 4-228
Fig. 4-229
Fig. 4-230
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 82
[1]
[2]
[3]
[1]
[2]
[3]
[4]