Toshiba e-STUDIO556 Service Manual page 262

(3) Remove 1 screw, 1 E-ring and then the
paddle bushing on the rear side.
(4) Replace the oil seal pressed into the paddle
bushing, if necessary.
* Procedure for replacing an oil seal:
( P.4-99 "4.9.18 Procedure for
replacing an oil seal")
(5) Remove the gear, 1 E-ring and then paddle
bushing on the front side.
(6) Replace the oil seal pressed into the paddle
bushing, if necessary.
(7) Take out the paddle.
* Procedure for replacing an oil seal:
( P.4-99 "4.9.18 Procedure for
replacing an oil seal")
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Paddle bushing
Fig. 4-275
Paddle
Fig. 4-276
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 98
Paddle bushing