Toshiba e-STUDIO556 Service Manual page 293

4.12.3 Exit sensor [S22]
(1) Take off the left lower cover (= exit cover).
( P.4-4 "4.1.11 Left lower cover (Exit
cover)")
(2) Disconnect 1 connector, remove 1 screw and
then take off the sensor with its bracket.
(3) Release the latch to take off the exit sensor.
4.12.4 Reverse sensor-1 [S23] / Reverse sensor-2 [S24]
(1) Take off the left lower cover (= exit cover).
( P.4-4 "4.1.11 Left lower cover (Exit
cover)")
(2) Disconnect 1 connector, remove 2 screws
and then take off the reverse sensor-1.
(3) Disconnect 1 connector, remove 1 screw and
then take off the reverse sensor-2.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Exit sensor
Fig. 4-358
Fig. 4-359
Fig. 4-360
e-STUDIO556/656/756/856/557/657/757/857
4 - 129
Exit sensor
Reverse sensor-1
Reverse sensor-2
DISASSEMBLY AND REPLACEMENT
4