Toshiba e-STUDIO556 Service Manual page 1101

Sub
05/08 Mode Element
element
08 Setting Counter Counter
Mode Settings
08 Setting Counter Custom
Mode counter
08 Setting Counter Custom
Mode counter
08 Setting Counter Custom
Mode counter
e-STUDIO556/656/756/856
Item Subitem
For dealer Weighting/Scanning
For dealer Weighting/Scanning
For dealer Weighting/Print
Sub- Default
Code Details
code value
6087 Color/Black quota 0
selection at twin/mono
color count
6088 0 Black/Gray 0
6088 1 Full Color 0
6089 0 Black/Small 100
42
Acceptable
RAM Contents
value
0-1 SYS When the pages are counted for twin/mono color
counter, this code sets whether the pages are
subtracted from ColorQuota or BlackQuota.
Not all the pages of TwinColor/MonoColor are
subtracted. The pages assigned to twin/mono color
counter are subtracted. The setting of this code is
enabled only in the Color/BlackQuota mode and not
enabled in the JobQuota mode.
If the value of this code is set to "0" (ColorQuota), an
error occurs if a user without color permission performs
twin color printing. Note that the same error occurs in
the JobQuota mode.
0: ColorQuota 1: BlackQuota
Related code:
08-6084, 08-9128, 08-9892
0-9999 SYS Weights addition of Scan Counter to Custom Counter
(Total Counter). Since the count is calculated based on
the existing Large/Small counter, the count before
changing this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
0-9999 SYS Weights addition of Scan Counter to Custom Counter
(Total Counter). Since the count is calculated based on
the existing Large/Small counter, the count before
changing this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
0-9999 SYS Weights addition of print to Custom Counter (Total
Counter). Since the count is calculated based on the
existing Large/Small counter, the count before changing
this setting is also included in the count.
0 (weight: 0.00) – 9999 (weight: 99.99)
Proce Servic
dure e UI
1
4
4
4