Toshiba e-STUDIO556 Service Manual page 175

4.3 Scanning Section
4.3.1 Original glass
(1) Take off the top right cover.
( P.4-2 "4.1.3 Top right cover")
(2) Remove 3 screws to take off the original
glass holder.
(3) Remove 2 caps and 2 screws to take off the
original glass.
4.3.2 Lens cover
(1) Take off the original glass.
( P.4-11 "4.3.1 Original glass")
(2) Remove 3 screws to take off the original
glass holder.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Original glass holder
Fig. 4-28
Cap
Fig. 4-29
Fig. 4-30
e-STUDIO556/656/756/856/557/657/757/857
4 - 11
Original glass
[1]
DISASSEMBLY AND REPLACEMENT
4