Toshiba e-STUDIO556 Service Manual page 951

Notes:
• When removing and installing the ROM, be careful not to deform the pins of ROM.
• Pay attention to the direction of the ROM.
(4) Install the PCB cover.
(5) After the replacing is completed, check the firmware version in Setting Mode (08) to confirm that
the data was changed properly.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
[2]
Mark for ROM
installation direction
11 - 61
ROM
e-STUDIO556/656/756/856/557/657/757/857
FIRMWARE UPDATING
11