Toshiba e-STUDIO556 Service Manual page 318

(5) Remove 4 screws and take off the platen
guide.
(6) Take off the reading start roller.
Note:
When installing the reading start roller, refix
the loosened screw and tighten the belt
tension.
4.13.21 Reading end roller
(1) Take off the RADF front cover.
( P.4-135 "4.13.2 RADF front cover")
(2) Take off the RADF rear cover.
( P.4-136 "4.13.3 RADF rear cover")
(3) Remove 1 clip and 1 bushing.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 154
Fig. 4-433
Fig. 4-434
Bushing
Clip
Fig. 4-435