Toshiba e-STUDIO556 Service Manual page 343

4.13.51 Original reading end sensor (SR4)
(1) Take off the reading end guide.
( P.4-142 "4.13.11 Exit guide / Exit/reverse
guide / Reading end guide")
(2) Disconnect 1 connector. Release 2 latches
and take off the original reading end sensor.
4.13.52 Original intermediate transport sensor (SR9)
(1) Take off the reading start guide unit.
( P.4-141 "4.13.10 Reading start guide
unit")
(2) Release 2 latches and take off the original
intermediate transport sensor.
4.13.53 Original reading start sensor (SR10)
(1) Take off the reading start guide unit.
( P.4-141 "4.13.10 Reading start guide
unit")
(2) Disconnect 1 connector. Remove 1 screw
and take off the sensor bracket.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-508
Original intermediate transport sensor
Fig. 4-509
Fig. 4-510
e-STUDIO556/656/756/856/557/657/757/857
4 - 179
DISASSEMBLY AND REPLACEMENT
4