Toshiba e-STUDIO556 Service Manual page 158

The following are 3 output channels for the cover switch line.
1. +5.1 V
+5VD: CN403 Pin 5
Output to the PLG board
2. +24 V
+24VD1: CN402 Pins 2 and 3
Output to the LGC board, external LCF (via LGC board)
+24VD2: CN402 Pin 1
Output to the LGC board
+24VD2: CN403 Pin 1
Output to the PLG board
+24VD2: CN404 Pin 3
Output to the SLG board
+24VD3: CN409 Pins 3 and 4
Output to the finisher
+24VD4 CN404 Pins 5 and 7
Output to the RADF
3. +36 V
+36VD: CN402 Pins 7 and 8
Output to the LGC board
+36VD: CN403 Pin 3
Output to the PLG board
+36VD: CN404 Pin 1
Output to the SLG board
Output voltage by the type of connector
main power switch line
Connector
CN405 For the SYS board, FAX unit (via SYS board)
CN406 For the LGC board, external LCF (via LGC board),
finisher (via LGC board)
CN407 For the PLG board
CN408 For the SLG board
CN409 For the finisher
Cover switch line
Connector
CN402 For the LGC board, external LCF (via LGC board) +24VD1, +24VD2, +36VD
CN403 For the PLG board
CN404 For the SLG board, RADF
CN409 For the finisher
e-STUDIO556/656/756/856/557/657/757/857
OUTLINE OF THE MACHINE
Destination
Destination
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
3 - 112
Voltage
+5VA, +5VB, +5VS, +12VA, +12VB
+3.3VB, +5VB, +12VB
+3.3VB, +5VB, +12VB
+3.3VB, +5VB, +12VB
+5VB
Voltage
+5VD, +24VD2, +36VD
+24VD2, +24VD4, +36VD
+24VD3