Toshiba e-STUDIO556 Service Manual page 288

(8) Remove 2 screws and disconnect 1
connector.
(9) Remove 1 C-ring (rear).
(10) Remove 1 E-ring and take off the gear and
one-way clutch.
(11) Remove 2 screws and take off the bearing
(rear).
(12) Remove 1 C-ring (front).
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Screw
Connector
Screw
Bearing ( rear )
Screw
Gear, One-way clutch
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 124
C-ring ( rear )
Fig. 4-344
Screw
E-ring
Fig. 4-345
C-ring ( front )
Fig. 4-346