Toshiba e-STUDIO556 Service Manual page 362

5.7 Test print pattern in Adjustment Mode (05)
Operation: One test print is printed out when the [FAX] button is pressed after the code is keyed in at
Standby Screen.
Code Types of test pattern
1 Grid pattern (same as 04-142)
3 Grid pattern 04-142 (Duplex printing)
Gamma check patch chart for copier (black) (same
6
as 04-103)
10 Gamma adjustment patch chart for copier (black)
(Same 04-101)
58 Leading edge position adjustment 04-142 (Thick
paper 2 mode)
59 Leading edge position adjustment 04-142 (Thick
paper 3 mode)
60 Leading edge position adjustment 04-142 (OHP
film mode)
101 Grid pattern – 1 (Black / Thick paper 1)
e-STUDIO556/656/756/856/557/657/757/857
SELF-DIAGNOSTIC MODE
Refer to  P.6-10 "6.3.3 Printer related
adjustment"
Thick paper not available
Refer to  P.6-10 "6.3.3 Printer related
adjustment"
Refer to  P.6-6 "6.3.2 Paper alignment at the
registration roller"
Refer to  P.6-6 "6.3.2 Paper alignment at the
registration roller"
For Thick paper 2
For Thick paper 3
For OHP films
For Thick paper 1(same as 04-113, THICK1)
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
5 - 12
Remarks