Toshiba e-STUDIO556 Service Manual page 230

(2) Remove 2 screws and take off the tray-up
unit.
(3) Disconnect 1 connector, release the latch
and take off the tandem LCF bottom sensor.
[ 5 ] End fence home position sensor (S73) / Standby side empty sensor (S74) / End
fence stop position sensor (S75)
(1) Remove 1 screw and take off the plate cover.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Tray-up unit
Fig. 4-183
Fig. 4-184
End fence
Fig. 4-185
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 66
Tandem LCF bottom sensor
Plate cover