Toshiba e-STUDIO556 Service Manual page 1052

Sub
05/08 Mode Element
element
05 Adjustmen Image Image Void amount in
t mode Processin network scanning
g
05 Adjustmen Image Density FAX(black)
t mode Processin adjustmen
g t
05 Adjustmen Image Density FAX(black)
t mode Processin adjustmen
g t
05 Adjustmen Image Density FAX(black)
t mode Processin adjustmen
g t
05 Adjustmen Image Density FAX(black)
t mode Processin adjustmen
g t
05 Adjustmen Image Density FAX(black)
t mode Processin adjustmen
g t
05 Adjustmen Image Image FAX (black)
t mode Processin contrast
g adjustmen
t
05 Adjustmen Image Image FAX (black)
t mode Processin contrast
g adjustmen
t
05 Adjustmen Image Image FAX (black)
t mode Processin contrast
g adjustmen
t
05 Adjustmen Image Image FAX (black)
t mode Processin contrast
g adjustmen
t
05 Adjustmen Image Image FAX (black)
t mode Processin contrast
g adjustmen
t
05 Adjustmen Image Blank
t mode Processin page
g judgment
threshold
adjustmen
t
e-STUDIO556/656/756/856
Item Subitem Code
7489
Manual 7533
adjustment/Center
value
Manual 7534
adjustment/Center
value
Manual 7535
adjustment/Center
value
Automatic density 7542
adjustment
Automatic density 7543
adjustment
7594
7594
7594
7594
7594
7618
Sub- Default Acceptable
Details
code value value
SCN 0 0-255
Text/Photo 128 0-255
Text 128 0-255
Photo 128 0-255
Text/Photo 128 0-255
Photo 128 0-255
0 Beam level 0/4 0 0-255
1 Beam level 1/4 32 0-255
2 Beam level 2/4 64 0-255
3 Beam level 3/4 94 0-255
4 Beam level 4/4 200 0-255
PPC/SCN 128 0-255
58
RAM Contents
SYS When the value increases, the blank area around the
scanned image becomes wider. (e.g.: In network
scanning with 600 dpi, if the setting value is "1", the
blank area increases by 1 dot.)
SYS The larger the value, the darker the image at the center
value becomes.
SYS The larger the value, the lighter the image at the center
value becomes.
SYS The larger the value, the darker the image at the center
value becomes.
SYS When the value increases, the image becomes darker.
SYS When the value increases, the image becomes darker.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
M The smaller the value, the narrower the beam width
becomes and the smaller the dots are reproduced.
SYS The larger the value, the more the original tends to be
judged as a blank page.
Proc Service
edure UI
1
1 Yes
1 Yes
1 Yes
1 Yes
1 Yes
4 Yes
4 Yes
4 Yes
4 Yes
4 Yes
1 Yes