Toshiba e-STUDIO556 Service Manual page 292

4.12 Exit/Reverse Section
4.12.1 Exit/Reverse unit
(1) Take off the left lower cover (= exit cover).
( P.4-4 "4.1.11 Left lower cover (Exit
cover)")
(2) Open the exit/reverse unit and remove 1
screw.
(3) Disconnect 1 connector. Then take off the
exit/reverse unit by lifting it up.
4.12.2 Reverse section cooling fan-1 [M24] / Reverse section cooling
fan-2 [M25]
(1) Take off the left lower cover (= exit cover).
( P.4-4 "4.1.11 Left lower cover (Exit
cover)")
(2) Disconnect 1 connector, remove 2 screws
and then take off the reverse section cooling
fan-1.
(3) Disconnect 1 connector, remove 2 screws
and then take off the reverse section cooling
fan-2.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Exit/Reverse unit
Exit/Reverse unit
Reverse section cooling fan-1
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 128
Fig. 4-355
Fig. 4-356
Reverse section cooling fan-2
Fig. 4-357