Toshiba e-STUDIO556 Service Manual page 560

Error code Classification
E3C0 Paper transport jam
E3C1
E3D0
E3E0
E3F0
E410 Cover open jam
E440
E450
E460
E470
E510 Paper transport jam
(Exit/Reverse section
or other sections)
E511
E512
E540
E550
E551
e-STUDIO556/656/756/856/557/657/757/857
ERROR CODE AND TROUBLESHOOTING
Contents
Tandem LCF transport jam (paper not reaching
registration sensor): Paper which has passed the
1st transport sensor does not reach the registration
sensor during the feeding at the Tandem LCF.
Tandem LCF transport jam (paper not reaching
intermediate transport sensor): Paper which has
passed the 1st transport sensor does not reach the
intermediate transport sensor during the feeding at
the Tandem LCF.
Tandem LCF transport jam (paper not reaching 1st
drawer transport sensor): Paper which has passed
the 2nd drawer transport sensor does not reach the
1st drawer transport sensor during the feeding at
the Tandem LCF.
Tandem LCF transport jam (paper not reaching 2nd
transport sensor): Paper which has passed the 3rd
drawer / Tandem LCF transport sensor does not
reach the 2nd drawer transport sensor during the
feeding at the Tandem LCF.
Tandem LCF transport jam (paper not reaching 3rd
drawer / Tandem LCF transport sensor): Paper
which has passed the 3rd drawer / Tandem LCF
feed sensor does not reach the 3rd drawer /
Tandem LCF transport sensor during the feeding at
the Tandem LCF.
Front cover open jam: The front cover has opened
during printing.
Right lower cover (feed cover) open jam: The feed
cover has opened during printing.
Option LCF side cover open jam: The side cover of
the Option LCF has opened during printing.
Right center cover (bypass feed unit cover) open
jam: The bypass feed unit cover has opened during
printing.
Left lower cover (exit cover) open jam: The exit
cover has opened during printing.
Transport jam during duplex printing (paper not
reaching reverse sensor-2): Paper which has
passed the reverse sensor-1 does not reach the
reverse sensor-2 during duplex printing.
Transport jam during duplex printing (paper not
reaching horizontal transport sensor-1): Paper
which has passed the reverse sensor-2 does not
reach the horizontal transport sensor-1 during
duplex printing.
Transport jam during duplex printing (paper not
reaching horizontal transport sensor-2): Paper
which has passed the horizontal transport sensor-1
does not reach the horizontal transport sensor-2
during duplex printing.
Transport jam during duplex printing (paper not
reaching horizontal transport sensor-3): Paper
which has passed the horizontal transport sensor-2
does not reach the horizontal transport sensor-3
during duplex printing.
Paper remaining jam at paper transport path: Paper
is remaining on the paper transport path when the
printing has finished. (Jam caused by a multiple
paper feeding)
Paper remaining on the transport path (when a
service call occurs)
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 8
Troubleshooting
P. 8-44
P. 8-46
P. 8-45
P. 8-50
P. 8-49
P. 8-66
P. 8-66
P. 8-67
P. 8-67
P. 8-68
P. 8-51
P. 8-52
P. 8-52
P. 8-53
P. 8-53
P. 8-54