Toshiba e-STUDIO556 Service Manual page 316

4.13.19 Intermediate transport roller
(1) Take off the reading start guide unit.
( P.4-141 "4.13.10 Reading start guide
unit")
(2) Loosen 1 screw.
(3) Remove 1 screw.
(4) Remove 1 E-ring and 1 bushing (front side).
Slide the intermediate transport roller,
remove 1 pulley and 1 bushing, and take off
the intermediate transport roller.
Note:
When installing the intermediate transport
roller, refix the loosened screw and tighten
the belt tension.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
Pulley
Bushing
Intermediate transport roller
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 152
Fig. 4-427
Fig. 4-428
Bushing
E-ring
Fig. 4-429