Toshiba e-STUDIO556 Service Manual page 344
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO556:
- Service manual (1094 pages) ,
- Troubleshooting manual (104 pages) ,
- Management manual (282 pages)
Advertisement
(3)
Release 2 latches and take off the original
reading start sensor.
Note:
When replacing the original reading start
sensor, be sure to perform the original
reading start sensor adjustment.
( P.6-80 "6.15.8 Original reading start
sensor adjustment")
4.13.54 Original reading start sensor (prism)
(1)
Take off the reading start guide unit.
( P.4-141 "4.13.10 Reading start guide
unit")
(2)
Remove 4 screws and take off the stay.
(3)
Remove 2 screws and take off the original
reading start sensor prism unit.
Note:
When replacing the original reading start
sensor, be sure to perform the original
reading start sensor adjustment.
( P.6-80 "6.15.8 Original reading start
sensor adjustment")
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 180
Fig. 4-511
Fig. 4-512
Fig. 4-513
Advertisement
