Toshiba e-STUDIO556 Service Manual page 339

(3) Remove 3 screws and take off the upper
reverse guide.
(4) Disconnect 1 connector. Release 2 latches
and take off the original exit sensor.
4.13.47 Original tray sensor (SR1)
(1) Take off the original reverse tray.
( P.4-139 "4.13.7 Original reverse tray")
(2) Remove 2 screws and release 8 latches to
take off the original side guide unit.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Upper reverse guide
Fig. 4-496
Fig. 4-497
Fig. 4-498
e-STUDIO556/656/756/856/557/657/757/857
4 - 175
DISASSEMBLY AND REPLACEMENT
4