Toshiba e-STUDIO556 Service Manual page 456

[B] Adjusting carriages-1 and -2 positions
<Procedure>
(1) Move the carriage-2 toward the exit side.
(2) Loosen the screws fixing the front side pulley bracket, make the sections A and B of the carriage-
2 touch with the inside of the exit side frame and screw them up.
[ Rear ]
(3) Put the carriage-1 on the rail, make the sections C and D of it touch with the inside of the exit
side frame and screw up the front/rear sides of the bracket to fix it.
Note:
Make sure that the sections A and B of the carriage-2 touch with the exit side frame.
[ Rear ]
Bracket
e-STUDIO556/656/756/856/557/657/757/857
ADJUSTMENT
Carriage-2
Pulley bracket
B
Fig. 6-34
Carriage-1
D
Fig. 6-35
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
6 - 52
[ Front ]
Exit side frame
A
[ Front ]
Exit side frame
Bracket
C