Toshiba e-STUDIO556 Service Manual page 311

(3) Pull out the shaft and take off the feed roller.
Note:
Make sure you assemble the pickup roller
with the one-way clutch in the correct
direction.
4.13.16 Separation roller
(1) Take off the RADF front cover.
( P.4-135 "4.13.2 RADF front cover")
(2) Take off the RADF rear cover.
( P.4-136 "4.13.3 RADF rear cover")
(3) Remove 4 screws and take off the feeder
upper guide unit.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Lock
(e-STUDIO556/656/756/856)
4 - 147
Fig. 4-413
Lock
Fig. 4-414
Fig. 4-415
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
4