Toshiba e-STUDIO556 Service Manual page 1104

Sub
05/08 Mode Element
element
08 Setting System Maintenance
Mode
08 Setting Process Fuser
Mode
08 Setting Process Fuser
Mode
08 Setting Counter Image quality
Mode control
08 Setting Counter Image
Mode processing
08 Setting Counter Image
Mode processing
08 Setting Counter Image
Mode processing
08 Setting Counter Image
Mode processing
08 Setting Counter Paper feeding Feeding retry counter
Mode
08 Setting Counter Paper feeding Feeding retry counter
Mode
e-STUDIO556/656/756/856
Item Subitem Code
6198
6199
6200
6211
6225
6226
6227
6228
6230
6231
Sub- Default Acceptable
Details
code value value
Switching of PM 0 0~2
timing display/ Output
pages or drive counts
Setting value to Refer to 8 digits
display that the contents
cleaning web is
almost consumed
Setting value to Refer to 8 digits
display that the contents
cleaning web is
consumed
Counter for 0 0~9999
accumulated number
of sheets after image
quality control
Number of output 0 8 digits
pages(Thick paper 1)
Number of output 0 8 digits
pages(Thick paper 2)
Number of output 0 8 digits
pages(Thick paper 3)
Number of output 0 8 digits
pages (OHP film)
1st drawer 0 8 digits
2nd drawer 0 8 digits
45
RAM Contents
M The PM timing can be displayed in these 2 methods.
(Messages will appear on the LCD panel.)
0: PM counter (Number of output pages can be set in
08-6190)
1: PM time counter(Drive counts can be set in 08-6191)
2: Whenever either the PM counter or the PM time
counter has exceeded the threshold
M <Default value>
e-STUDIO556: 410,000
e-STUDIO656: 465,000
e-STUDIO756: 490,000
e-STUDIO856: 550,000
(Setting value x1 sheet)
M <Default value>
e-STUDIO556: 460,000
e-STUDIO656: 515,000
e-STUDIO756: 540,000
e-STUDIO856: 600,000
(Setting value x 1 sheet)
M The total number of output pages from the last image
quality closed-loop control (excluding the one at "Image
quality control enforcement (05-2120)") is displayed.
M The counter starts counting up when the registration
sensor is turned ON in the Thick Paper 1 mode.
M The counter starts counting up when the registration
sensor is turned ON in the Thick Paper 2 mode.
M The counter starts counting up when the registration
sensor is turned ON in the Thick Paper 3 mode.
M The counter starts counting up when the registration
sensor is turned ON in the OHP mode.
M Counts the number of times of the feeding retry from
the 1st drawer.
M Counts the number of times of the feeding retry from
the 2nd drawer.
Proce Servic
dure e UI
1
1
1
2
1
1
1
1
1 Yes
1 Yes