Download Print this page

Toshiba e-STUDIO556 Service Manual page 928

Multifunctional digital systems
Hide thumbs Also See for e-STUDIO556:

Advertisement

(8)
Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the number of the
item. All items are selected in the default settings.
(9)
Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
(10) "Update Completed." is displayed at the bottom of the LCD screen after the updating is
completed properly. Turn the power OFF by pressing the [ON/OFF] button.
Note:
"Update Failed." is displayed at the bottom of the LCD screen when the updating is not
completed properly. "Failed" appears next to the failed item on the status display. In this case,
shut down the equipment and check the following items. Then clear the problems and restart
updating from the beginning.
-
Is the download jig connected properly?
-
Is the updating data written to the download jig properly?
-
Do the download jig and the equipment operate properly?
(11) Press the [ON/OFF] button on the control panel to shut down the equipment.
Note:
When the equipment has been shut down normally, the LCD screen and LEDs (green and red)
go OFF.
When OS data have been updated and the equipment has been shut down immediately after the
update, the LEDs (green and red) may not go OFF even if the LCD screen goes OFF. This
indicates that the equipment has not shut down normally. Press the [ON/OFF] button on the
control panel. Five seconds or so after the beep, turn the main power switch OFF, and then
remove the download jig.
(12) Remove the download jig.
(13) Pass the HDD harness through the clamp and connect 2 connectors [1] to the SYS board.
(14) Install the SYS board cover.
 P.9-1 "9.1.1 SYS board cover"
(15) Turn the power ON using the main power switch while holding down the [3] and [C] keys
simultaneously.
(16) Press the [5] key to select "5. Key Backup Restore", then press the [START] button.
e-STUDIO556/656/756/856/557/657/757/857
FIRMWARE UPDATING
[1]
Fig. 11-12
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
11 - 38

Advertisement

loading