Toshiba e-STUDIO556 Service Manual page 1106

Sub
05/08 Mode Element
element
08 Setting Counter Paper feeding
Mode
08 Setting Counter Paper feeding
Mode
08 Setting Counter Counter
Mode
08 Setting Counter Paper feeding
Mode
08 Setting Counter PM counter
mode
e-STUDIO556/656/756/856
Item Subitem
Photoconductive
drum
Sub- Default
Code Details
code value
6241 Feeding retry counter 0
upper limit
value(Tandem LCF)
6242 Feeding retry 0
counter(Option LCF)
6244 Counter for tab paper 0
6245 Feeding retry counter 0
upper limit value (O-
LCF)
6250 0 Present number of 0
output pages
47
Acceptable
RAM Contents
value
8 digits M When the number of feeding retry (08-6230 to 08-6235)
exceeds the setting value, the feeding retry will not be
performed subsequently. In case "0" is set as a setting
value, however, the feeding retry continues regardless
of the counter setting value.
8 digits M Counts the number of times of the feeding retry from
the Option LCF.
8 digits M The counter starts counting up when the registration
sensor is turned ON in the Tab Paper mode.
8 digits M When the number of feeding retry (08-6242) exceeds
the setting value, the feeding retry will not be performed
subsequently. In case "0" is set as a setting value,
however, the feeding retry continues regardless of the
counter setting value.
* In this equipment, a toner image is formed on the
transfer belt prior to a paper feeding. When the feeding
retry occurs and the transport timing is delayed, the
toner image on the transfer belt is cleaned off without
the 2nd transfer since the paper cannot be reached for
the 2nd transfer process. After that, the toner image
formation is retried while the paper is waited. In this
case, the toner for this image formation is consumed
wastefully since the toner image on the transfer belt is
already cleaned off, even though the printing is normally
completed. Therefore, note that the excessive toner will
be consumed consequently when the upper limit value
of feeding retry counter is set larger or set as "0" (no
limit). The toner is also consumed wastefully when the
paper misfeeding occurs. Replace the roller at earlier
timing if the paper misfeedings have occurred
frequently.
8 digits M
Proce Servic
dure e UI
1
1
1
1
4