Toshiba e-STUDIO556 Service Manual page 159

[B] e-e-STUDIO557/657/757/857
1. +3.3 V
+3.3VB: CN406 Pin 7
Output to the LGC board
+3.3VB: CN407 Pin 6
Output to the PLG board
2. +5.1 V
+5VS: CN405 Pin 10
Output to the SYS board
+5VA: CN405 Pins 5 and 6
Output to the SYS board
+5VB: CN406 Pin 4
Output to the LGC board, external LCF (via LGC board),
IPC board (finisher: via LGC board)
+5VB: CN407 Pins 2 and 3
Output to the PLG board
+5VB: CN409 Pin 1
Output to the finisher
3. +12 V
+12VA: CN405 Pins 1 and 2
Output to the SYS board
+12VB: CN408 Pin 1
Output to the SYS board, FAX unit (via SYS board)
+12VB: CN406 Pin 1
Output to the LGC board
The following are 3 output channels for the cover switch line.
1. +24 V
+24VD1: CN402 Pins 1 and 2
Output to the LGC board, external LCF (via LGC board)
+24VD2: CN416 Pin 3
Output to the LGC board
+24VD2: CN403 Pin 1
Output to the PLG board
+24VD2: CN415 Pin 2
Output to the DRV board
+24VD3: CN409 Pins 3 and 4
Output to the finisher
+24VD4 CN404 Pins 1 and 2
Output to the RADF
2. +36 V
+36VD: CN402 Pins 5 and 6
Output to the LGC board
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO556/656/756/856/557/657/757/857
3 - 113
OUTLINE OF THE MACHINE
3