Toshiba e-STUDIO556 Service Manual page 126

3.12 Process Related Section
3.12.1 Construction
This chapter describes the following unit regarding the image forming process.
• Main charger
• Charger wire cleaner
• Discharge LED
• Ozone filter
• Surface potential sensor
• High-voltage transformer
• Temperature/Humidity sensor
The drum/cleaner unit is described in chapter 3.13, the developer unit is described in chapter 3.14 and
the transfer/transport unit is described in chapter 3.15.
Discharge LED
e-STUDIO556/656/756/856/557/657/757/857
OUTLINE OF THE MACHINE
Main charger
Drum
Fig. 3-55
3 - 80
Charger wire cleaner
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Drum surface
potential sensor