Toshiba e-STUDIO556 Service Manual page 508

6.20 Adjustment of LCF (MP-4004)
6.20.1 Sheet sideways deviation adjustment
When the center of the printed image shifts to the front side or rear side, adjust the tray position taking
the following procedure.
<Procedure>
(1) Pull out the tray unit.
(2) Loosen 3 screws and move the adjustment board to the right position. Then screw it shut.
• The center of the printed image shifts to the front side:
Move the adjustment board to the front side (Arrow (B) in the upper figure).
e-STUDIO556/656/756/856/557/657/757/857
ADJUSTMENT
A B
Adjustment board
Fig. 6-118
[ Rear ]
Feeding direction
[ Front ]
Fig. 6-119
6 - 104
Center
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved