Toshiba e-STUDIO556 Service Manual page 341

(3) Remove 1 screw and take off the sensor
cover.
(4) Disconnect 1 connector and take off the
original tray width sensor.
4.13.49 Original exit/reverse sensor (SR11)
(1) Take off the platen sheet unit.
( P.4-139 "4.13.8 Platen sheet unit")
(2) Remove 1 screw and take off the locking
lever on the front side. Remove 1 screw and
take off the locking lever on the rear side.
Remove 1 spring and take off the locking
bracket.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-502
Fig. 4-503
Spring
Locking lever
Fig. 4-504
e-STUDIO556/656/756/856/557/657/757/857
4 - 177
Locking lever
Locking Bracket
DISASSEMBLY AND REPLACEMENT
4