Toshiba e-STUDIO556 Service Manual page 336

4.13.40 Original jam access cover opening/closing sensor (SR13)
(1) Open the original jam access cover.
(2) Remove 4 screws and take off the sensor
bracket.
(3) Disconnect 1 connector. Release 2 latches
and take off the original jam access cover
opening/closing sensor.
4.13.41 Feeder lower guide unit
(1) Take off the original tray.
( P.4-138 "4.13.6 Original tray")
(2) Take off the guide.
e-STUDIO556/656/756/856/557/657/757/857
DISASSEMBLY AND REPLACEMENT
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
4 - 172
Fig. 4-487
Original jam access cover
opening/closing sensor
Fig. 4-488
Fig. 4-489