Toshiba e-STUDIO556 Service Manual page 1065

Sub
05/08 Mode Element
element
08 Setting Process Fuser
Mode
08 Setting Process Developer
Mode
08 Setting Process Process
Mode
08 Setting Process Process
Mode
08 Setting Process Process
Mode
08 Setting Process Charger
Mode
08 Setting Process Process
Mode
08 Setting Process Image quality
Mode control
08 Setting Process Image quality
Mode control
e-STUDIO556/656/756/856
Item Subitem Code
2268
2816
2817
2818
2819
2831
2832
2842
2844
Sub- Default Acceptable
Details
code value value
Printing operation 0 0~1
setting at the end of
cleaning web
Toner density life 3 0~7
correction switching
Toner supply amount 0 0~8
correction/ New toner
supply motor control
Toner supply amount 0 0~8
correction/ Hopper
motor control
Recycle toner supply 1 0~1
control switching
Wire cleaning 4 0~6
operation cycle
setting
Drum pre-running 0 0~255
period
Developer unit 10 0~99
prerunning period
before image quality
closed-loop control
0 Image quality closed- 0 0~1
loop control(Contrast
voltage)
6
RAM Contents
M 0: Stop operation 1: Continue operation
M 0: Approx. 0.75% lower than current status
1: Approx. 0.50% lower than current status
2: Approx. 0.25% lower than current status
3: Unchanged (Default)
4: Approx. 0.15% higher than current status
5: Approx. 0.25% higher than current status
6: Approx. 0.50% higher than current status
7: Approx. 0.75% higher than current status
M The supply amount of new toner to the developer unit
(the
drive counts of the new toner supply motor) is
corrected.
Smaller<-Toner supply amount->Larger
5->4->3->1->0->2->6->7->8
M The supply amount of recycle toner to the developer
unit (the drive counts of the hopper motor) is corrected.
Smaller<-Toner supply amount->Larger
3->1->0->7->6->5->4->8->2
M This setting is whether the recycle toner is supplied or
not when the toner cartridge is empty.
0: Supplied 1: Not supplied
M 0: Disabled 1: 500 sheets interval 2: 1,000 sheets
interval 3: 1,500 sheets interval 4: 2,000 sheets interval
5: 2,500 sheets interval 6: 3,000 sheets interval
M 0: Disabled 1-255: 1-255 sec.
M Unit: Second
M 0: Enabled 1: Disabled
Proce Servic
dure e UI
1
1
1
1
1
1 Yes
1
1
4