Toshiba e-STUDIO556 Service Manual page 636

Multifunctional digital systems

Hide thumbs Also See for e-STUDIO556:

[EC20] Inserter reverse path delay jam-1

[EC30] Inserter reverse path stop jam-1

[EC40] Inserter reverse path delay jam-2

[EC50] Inserter reverse path stop jam-2

Are the transport roller and reverse roller tainted?

YES  Clean up the rollers.

Is the harness between the inserter control board and reverse path sensor is open-

YES  Replace the harness.

Is the reverse path sensor working improperly?

YES  Replace the reverse path sensor.

Replace the inserter control board.

[EC60] Inserter transport delay jam-1

[EC70] Inserter transport stop jam-1

[EC80] Inserter transport delay jam-2

[EC90] Inserter transport stop jam-2

Is the transport roller tainted?

YES  Clean up the roller.

Is the harness between the inserter control board and transport sensor is open-circuited?

YES  Replace the harness.

Is the transport sensor working improperly?

YES  Replace the transport sensor.

Replace the inserter control board.

e-STUDIO556/656/756/856/557/657/757/857

ERROR CODE AND TROUBLESHOOTING