(h)
(i)
Air cleaner clamp
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE CONTROL SYSTEM
5.
REMOVE AIR CLEANER CAP SUB–ASSY
(a)
Disconnect the mass air flow meter connector.
(b)
Disconnect the VSV connector.
(c)
Remove the 2 wire harness clamps.
(d)
Disconnect the ventilation hose.
(e)
Disconnect the fuel vapor feed hose No. 1.
(f)
Disconnect the fuel vapor feed hose N0. 2.
(g)
Remove the fuel vapor feed hose No. 2 from 2 clamps of
the air cleaner hose.
(h)
Lock the hose clamp as shown in the illustration.
(i)
Raise the air cleaner clamp up, slide it to the air cleaner
cap.
(j)
Remove the air cleaner cap together with air cleaner hose
No. 1.
(c)
(d)
6.
SEPARATE ACCELERATOR CONTROL CABLE ASSY
(a)
Loosen the nut and separate the accelerator control
cable.
A77874
http://vnx.su
–
THROTTLE BODY ASSY (1AZ–FE)
(g)
(b)
(c)
(a)
(g)
(e)
(f)
10–27
A77873