Link Aggregation Control Protocol; Group Id - ZyXEL Communications MetroGigabit MGS3750-28F User Manual

6.10.2 Link Aggregation Control Protocol

Use t his screen t o enable Link Aggregat ion Cont rol Prot ocol.
Click LACP in t he upper right corner of Lin k Aggr e ga t ion Se t t in g screen.
Figure 35 Link Aggregat ion Cont rol Prot ocol Screen
The following t able describes t he fields in t his screen.
Table 28 Link Aggregat ion Cont rol Prot ocol Screen
LABEL
Syst em Priorit y

6.10.3 Group ID

Figure 36 Group I D Screen
The following t able describes t he fields in t his screen.
Table 29 Group I D Screen
LABEL
Group I D
LACP Act ive
Chapter 6 Advanced Application Configurations
DESCRIPTION
Enable t he aggregat ion group t hen set t he priorit y of t he port s wit hin t he group.
Default is 32768.
DESCRIPTION
This field displays t he group I D t o ident ify a t runk group, t hat is, one logical link
cont aining m ult iple port s.
Enable/ Disable aggregat ion group.
MGS3750-28F User's Guide
44