Igmp Snoop Statistics Commands; Igmp Snoop Info Statistics Command; Igmp Group Statistics Command; Figure 194 Igmp Count Show Command Example - ZyXEL Communications IES-1248-71 User Manual

Figure 194 IGMP Count Show Command Example

ras> switch igmpsnoop igmpcount show 1~5
port enable count
---- ------ -----
1 -
2 -
3 -
4 -
5 -

50.7 IGMP Snoop Statistics Commands

Use the IGMP Snoop Statistics commands to display current IGMP settings and statistics.

50.7.1 IGMP Snoop Info Statistics Command

Syntax:
ras> statistics igmpsnoop info [clear]
This command displays the current IGMP settings and the number of IGMP-related packets
received. The following figure shows an example.

Figure 195 IGMP Snoop Info Statistics Command Example

ras> statistics igmpsnoop info
IGMP Snooping/Proxy is Disable
number of query
number of report
number of leave
number of groups

50.7.2 IGMP Group Statistics Command

Syntax:
ras> statistics igmpsnoop group [<vid> [<mcast_ip>]]
where
<vid>
<mcast_ip>
This command displays the information about IGMP groups learned on the system, specified
VLAN, or specified multicast address on the specified VLAN(s).
IES-1248-71/73 User's Guide
5
5
5
5
5
= 0
= 0
= 0
= 0
The VLAN ID [1 – 4094].
=
The multicast IP address.
=
Chapter 50 IGMP Commands
343