Omron NX701-17 Series Troubleshooting Manual page 97

Event code Event name
10320000 hex SD Memory
(Ver. 1.11 or Card Pro-
later) gram Trans-
fer Failed to
Start
NJ/NX-series Troubleshooting Manual (W503)
Meaning Assumed cause
An error was • Program transfer by system-
defined variable is set to Do not
detected in pre-start
use in the Controller Setup.
checks for transfer-
• Password of Program transfer
ring SD Memory
by system-defined variable in
Card programs.
the Controller Setup does not
agree with the _Card1Prg-
TransferCmd.Password sys-
tem-defined variable.
• The DIP switch on the CPU Unit
is not set to allow starting the SD
Memory Card program transfer.
• An SD Memory Card is not inserted.
• The SD Memory Card type is
not correct.
• The format of the SD Memory
Card is not correct.
• There is no such folder on the
SD Memory Card as specified by
the _Card1PrgTransferCmd.Dir-
Name system-defined variable.
• There are no backup files in
such a folder on the SD Mem-
ory Card as specified by the
_Card1PrgTransferCmd.Dir-
Name system-defined variable.
• Either the backup files in the folder
specified by the _Card1PrgTransfer-
Cmd.DirName system-defined vari-
able on the SD Memory Card are
corrupted or required data is not in the
backup files on the SD Memory Card.
• The unit version of the CPU Unit to
which to transfer the files is older
than the unit version of the backup
files on the SD Memory Card.
• The model of the CPU Unit to which
to transfer the files is not the same as
the model of the CPU Unit of the
backup files on the SD Memory Card.
• The CPU Unit is write-protected.
• Another backup operation is in
progress.
• Synchronization, online edit-
ing, or the Clear All Memory
operation is in progress.
• Required files are not set to
transfer in the setting of the
_Card1PrgTransferCmd sys-
tem-defined variable.
• Reading the data for the SD Mem-
ory Card program transfer failed
because the SD Memory Card is
faulty or not formatted correctly.
• The SD Memory Card is damaged.
• The database connection ser-
vice version of the CPU Unit to
which to transfer the files is older
than the database connection
service version of the backup
files on the SD Memory Card.
• The robot version of the CPU Unit to
which to transfer the files is older than
the robot version of the backup files on
the SD Memory Card.
3 Error Tables
Level
Maj Prt Min Obs Info
S W500, W501,
W535, W578
Reference
3
3-19