A-1-1 Combinations Of Hmis And Cpu Units That Enable Using The Troubleshooter; Combinations Of Hmis And Cpu Units That Enable Using The Troubleshooter - Omron NX701-17 Series Troubleshooting Manual

Appendix
A-1 Applicable Range of the HMI
Troubleshooter
Whether the HMI Troubleshooter can be used depends on the combination of the HMI and the CPU
Unit. Also, the system configuration elements that are supported by the HMI Troubleshooter are differ-
ent for each Troubleshooter function.
A-1-1 Combinations of HMIs and CPU Units That Enable Using the
Troubleshooter
Whether the HMI Troubleshooter can be used depends on the combination of the HMI and the CPU
Unit.
 NA-series HMIs
The models of HMIs on which the Troubleshooter can be used are given in the following table.
HMI
NA5
Whether the Troubleshooter can be used for specific system versions of the above HMI models is
given in the following table.
HMI system version
Version 1.02 or higher
Version 1.01 or lower
 NS-series HMIs
The models of HMIs on which the Troubleshooter can be used are given in the following table.
HMI
NS8, NS10, NS12, and NS15
NS5
NSJ8, NSJ10, and NSJ12
NSJ5
Whether the Troubleshooter can be used for specific system versions of the above HMI models is given
in the following table.
HMI system version
Version 8.9 or higher
Version 8.5 to 8.8
Ver. 8.4 or lower
A-2
NA5-
Connected CPU Unit
NX-series CPU Unit
Can be used.
The HMI does not have a Troubleshooter.
NS-T01-V2 (The V2 versions have an Ethernet port.)
NS5-Q11-V2 (These models have expanded memory and an Ethernet port.)
All models
NSJ5-Q11- (These models have expanded memory and an Ethernet port.)
Connected CPU Unit
NX-series CPU Unit
Can be used.
Cannot be used.
The HMI does not have a Troubleshooter.
Model
NJ-series CPU Unit
Model
NJ-series CPU Unit
Can be used.
NJ/NX-series Troubleshooting Manual (W503)