Omron NX701-17 Series Troubleshooting Manual page 64

2 Error Troubleshooting Methods
Select the Controller with an error and click the Show Controller Events Button to display the Control-
ler Event List Screen. In the Controller Event List Screen, you can check the list of Controller errors that
currently exist in the selected Controller.
Resetting Errors with an HMI
You can use the Troubleshooter in an HMI to reset errors that occur in the Controller. Before you
attempt to reset a Controller error, isolate and remove the cause of the error.
The following example demonstrates the procedure used to check for errors with an NA-series HMI.
Select an event in the Controller Event List Screen and click the Show Detail Button to display error's
causes and corrections. In the Details Screen, information such as the error's causes and corrections
are displayed.
After you confirm the cause of the displayed error, perform the steps in the displayed correction.
After you complete all of the correction steps for the current errors, click the Error Reset Button in the
Controller Event List Screen to reset all of the current errors.
2-12 NJ/NX-series Troubleshooting Manual (W503)