Omron NX701-17 Series Troubleshooting Manual page 172

3 Error Tables
Event code Event name
572B0000 hex Number of
(Ver. 1.06 or Array Ele-
later) ments in
Switch Struc-
ture Variable
Out of Range
572C 0000 hex Number of
(Ver. 1.06 or Array Ele-
later) ments in Out-
put Signal
Structure
Variable Out
of Range
572D 0000 hex Number of
(Ver. 1.06 or Array Ele-
later) ments in
Track Option
Structure
Variable Out
of Range
572E0000 hex Numbers of
(Ver. 1.06 or Elements in
later) Output Sig-
nals and
Track Option
Arrays Not
Matched
57310000 hex Same Track
(Ver. 1.06 or Number Set-
later) ting in Switch
Structure Out
of Range
3-94
Meaning Assumed cause
The number of ele- • The number of elements in an
ments in an array in array of the structure variable
the structure vari- that was specified for the in-out
able that is speci- variable of the instruction is out
fied in the Switches of range.
in-out variable to a
motion control
instruction is out of
range.
The number of ele- • The number of elements in an
ments in an array in array of the structure variable
the structure vari- that was specified for the in-out
able that is speci- variable of the instruction is out
fied in the Outputs of range.
in-out variable to a
motion control
instruction is out of
range.
The number of ele- • The number of elements in an
ments in an array in array of the structure variable
the structure vari- that was specified for the in-out
able that is speci- variable of the instruction is out
fied in the of range.
TrackOptions in-out
variable to a motion
control instruction is
out of range.
The arrays in the • The arrays in the output signal
structure variables structure variable and track
that are specified option structure variable that
for the Outputs and are specified for the in-out vari-
TrackOptions in-out ables to the instruction do not
variables to a have the same number of ele-
motion control ments.
instruction do not
have the same
number of ele-
ments.
The same track • The same track number was
number was speci- specified more than the allow-
fied more than the able number of times for the
allowable number TrackNumber in the Switches
of times for the in-out variable to a motion con-
TrackNumber in the trol instruction.
Switches in-out
variable to a motion
control instruction.
Level
Maj Prt Min Obs Info
S
S
S
S
S
NJ/NX-series Troubleshooting Manual (W503)
Reference
W508
W508
W508
W508
W508