Omron NX701-17 Series Troubleshooting Manual page 185

Event code Event name
95D20000 hex Server Certif-
icate Gener-
ated
95D30000 hex Client Certifi-
cate Dis-
carded
95D40000 hex OPC UA
Server Certif-
icate and
Security Pro-
file Cleared
OPC UA Instructions
The lower four digits of the following event codes indicate the instruction error codes. For descriptions
of an error code, refer to the description of the corresponding event code. For example, if the error code
for the instruction is 16#5000, refer to the description for event code 54015000 hex.
Event code Event name
54015000 hex OPC UA
Server Termi-
nated or
Being Termi-
nated
54015001 hex OPC UA
Server Being
Initialized
54015002 hex OPC UA
Server Not
Started
NJ/NX-series Troubleshooting Manual (W503)
Meaning Assumed cause
A server certificate • A server certificate was gener-
was generated. ated.
The server certifi-
cate is automati-
cally generated
when there is no
server certificate,
The server certifi-
cate is generated
when regenerating
the server certifi-
cate,
Received client cer- • The maximum number of client
tificates were dis- certificates that can be regis-
carded tered in the rejected certificate
list has been exceeded.
The OPC UA • A restore was executed using a
Server certificate backup file created by a CPU
and Security Pro- Unit with a Unit version that
file has been does not have OPC UA Server
deleted.
• A project that does not have
OPC UA Server was down-
loaded to the CPU Unit.
• Checked "Clearing the OPC
UA server certificate and secu-
rity profile." and performed
Clear All Memory operation.
Meaning Assumed cause
The OPC UA • The OPCUA_Shutdown
instruction was executed while
Server was already
the OPC UA Server was
terminated or was
already terminated.
being terminated.
• The OPCUA_Shutdown
instruction was executed while
the OPC UA Server was being
terminated.
The OPCUA_Shut- • The OPCUA_Shutdown
down instruction instruction was executed while
could not be exe- the OPC UA Server was being
cuted because the initialized.
OPC UA Server
was being initial-
ized.
The relevant • When the Server Use Option is
instruction could not set to "Do not use", the relevant
be executed instruction was executed.
because the OPC
UA Server had not
been started.
3 Error Tables
Level
Maj Prt Min Obs Info
S
S
S
Level
Maj Prt Min Obs Info
S
S
S
Reference
W588
W588
3
W588
Reference
W588
W588
W588
3-107