Omron NX701-17 Series Troubleshooting Manual page 195

Event code Event name
5401381B hex Insufficient
Transaction
Resource
54013820 hex Too Many Char-
acters
54013821 hex Invalid Size
54013822 hex Set to Disable
54013824 hex Undefined CEID
54013825 hex Undefined ALID
54013826 hex Undefined
CCODE
54013827 hex Undefined Mes-
sage Number
54013828 hex HSMS Commu-
nications Set-
ting Out of
Range
54013829 hex TID Out of
Range
5401382C hex Undefined ECID
5401382D hex Type Mismatch
5401382E hex ECV Out of
Range
NJ/NX-series Troubleshooting Manual (W503)
Meaning Assumed cause
The instruction was • The instruction was exe-
executed while the cuted while the number
number of transac- of transactions that can
tions that can be buff- be buffered exceeds the
ered exceeds the upper limit.
upper limit.
More characters were • More characters were
specified than the num- specified than the num-
ber that was set and ber of characters set with
the instruction was the SECS/GEM Configu-
executed. rator.
An incorrect array or an • A value was specified
array with an incorrect that is larger than the
number of elements maximum table size set
was specified and the with the SECS/GEM
instruction was exe- Configurator.
cuted.
The instruction that • The instruction executed
was set to disable was for a GEM capability was
executed. disabled on the
SECS/GEM Configura-
tor.
An undefined CEID • A CEID that was not
was specified and the defined in the
instruction was exe- SECS/GEM Configura-
cuted. tor was specified.
An undefined ALID • An ALID that was not
was specified and the defined in the
instruction was exe- SECS/GEM Configura-
cuted. tor was specified.
An undefined CCODE • A CCODE that was not
was specified and the defined in the
instruction was exe- SECS/GEM Configura-
cuted. tor was specified.
An undefined mes- • A message number that
sage number was was not defined in the
specified and the SECS/GEM Configura-
instruction was exe- tor was specified.
cuted.
An HSMS communica- • An HSMS communica-
tions setting that is out tions setting that is out of
of range was specified range was specified.
and the instruction was
executed.
A TID that is out of • A TID that is out of range
range was specified was specified.
and the instruction was
executed.
An undefined ECID • An ECID that was not
was specified and the defined in the
instruction was exe- SECS/GEM Configura-
cuted. tor was specified.
A value with an incor- • A different equipment
rect data type was constant data type than
specified and the the one registered with
instruction was exe- the SECS/GEM Configu-
cuted. rator was specified.
An out-of-range value • A value was specified
was specified for an that is outside the upper
equipment constant and lower limits of the
and the instruction was value of the equipment
executed. constant that was set on
the SECS/GEM Configu-
rator.
3 Error Tables
Level
Maj Prt Min Obs Info
S
S
S
S
S
S
S
S
S
S
S
S
S
Refer-
ence
W528
W528
W528
3
W528
W528
W528
W528
W528
W528
W528
W528
W528
W528
3-117