Omron NX701-17 Series Troubleshooting Manual page 67

Resetting Controller Errors with Instructions
You can use the instructions that are provided to reset errors in the user program to reset errors that
occur in the Controller. Before you attempt to reset a Controller error, isolate and remove the cause of
the error. Reset the errors with the instruction provided to reset errors for each function module.
Instruction name
Reset PLC Controller Error
Reset I/O Bus Controller Error
Reset NX Bus Error
Reset Motion Control Error
Reset EtherCAT Error
Refer to the NJ/NX-series Instructions Reference Manual (Cat. No. W502) for details on these instruc-
tions.
NJ/NX-series Troubleshooting Manual (W503)
Instruction Function
ResetPLCError Resets current Controller errors from the PLC Function
Module.
ResetCJBError Resets current Controller errors from the I/O bus of the
NJ-series CPU Unit.
ResetNXBError Resets the current Controller errors in the NX Bus Func-
tion Module.
ResetMCError Resets current Controller errors from the Motion Control
Function Module.
ResetECError Resets current Controller errors from the EtherCAT Mas-
ter Function Module.
2 Error Troubleshooting Methods
2
2-15