Omron NX701-17 Series Troubleshooting Manual page 91

Event code Event name
10280000 hex Error in Exe-
(Ver. 1.03 or cuting Auto-
later) matic
Transfer
NJ/NX-series Troubleshooting Manual (W503)
Meaning Assumed cause
The automatic • It was not possible to read the
transfer ended in an data for automatic transfer.
error.
• The SD Memory Card was
removed during an automatic
transfer.
• There are no backup files in the
autoload folder on the SD
Memory Card.
• The backup files in the autoload
folder on the SD Memory Card
are corrupted.
• The SD Memory Card is dam-
aged.
3 Error Tables
Level
Maj Prt Min Obs Info
S W500, W501,
W535, W578
Reference
3
3-13