Omron NX701-17 Series Troubleshooting Manual page 87

Event code Event name
04020000 hex PLC System
Information
44410000 hex PLC System
Information
Errors Related to the Built-in I/O and Option Boards
The manual names are given below for the catalog numbers given in the Reference column of the
event table.
Cat. No.
W579
Event code Event name
05440000 hex Option Board
(Ver. 1.13 or Error
later)
35940000 hex Option Board
(Ver. 1.13 or Configura-
later) tion Verifica-
tion Error
35950000 hex Unsupported
(Ver. 1.13 or Option Board
later) Mounted
88130000 hex Analog
(Ver. 1.13 or Option Board
later) Startup Error
88140000 hex Analog
(Ver. 1.13 or Option Board
later) Communica-
tions Error
NJ/NX-series Troubleshooting Manual (W503)
Meaning Assumed cause
This event pro- • This event provides internal
vides internal infor- information from the PLC Func-
mation from the tion Module. It is recorded to
PLC Function Mod- provide additional information
ule. for another event.
This event pro- • This event provides internal
vides internal infor- information from the PLC Func-
mation from the tion Module. It is recorded to
PLC Function Mod- provide additional information
ule. for another event.
NX-series NX1P2 CPU Unit Built-in I/O and Option Board User's Manual
Meaning Assumed cause
An Option Board • An Option Board was removed
was removed or or mounted during operation.
mounted during
• A hardware error was detected
operation, or an
in an Option Board.
Option Board hard-
ware error
occurred.
The Option Board • The Option Board configura-
configuration setup tion setup does not agree with
does not agree with the actual configuration.
the actual configu-
• An Option Board is not
ration.
mounted correctly.
There is an unsup- • There is an unsupported Option
ported Option Board in the actual configura-
Board in the actual tion.
configuration.
An error occurred • An Analog Option Board is not
when an Analog mounted correctly. Or an Ana-
Option Board is log Option Board failed.
started.
A communications • If the indicator on an Analog
error occurred Option Board flashes, it means
during Analog that an error occurred in com-
Option Board oper- municating with the Analog
ation. Option Board during operation.
• If the indicator on an Analog
Option Board is lit, it means that
a WDT error occurred in the
Analog Option Board.
Level
Maj Prt Min Obs Info
Manual name
Level
Maj Prt Min Obs Info
S
S
S
S
S
3 Error Tables
Reference
S W500
S W500
3
Reference
W579
W579
W579
W579
W579
3-9