Omron NX701-17 Series Troubleshooting Manual page 230

3 Error Tables
Event code Event name
35040000 hex Mailbox Set-
ting Error
35050000 hex RxPDO Set-
ting Error
35060000 hex TxPDO Set-
ting Error
35070000 hex PDO WDT
Setting Error
35080000 hex SM Event
Mode Set-
ting Error
35090000 hex TxPDO Map-
ping Error
350A0000 hex RxPDO Map-
ping Error
350B0000 hex Illegal State
Transition
Request
Received
350C 0000 hex Error State
Transition
Received
350D 0000 hex Synchroniza-
tion Cycle
Setting Error
40200000 hex NX Unit Pro-
cessing Error
84C0 0000 hex NX Unit
Communica-
tions Timeout
3-152
Meaning Assumed cause
An incorrect mail- • An incorrect mailbox setting
box setting was was detected for the Sync Man-
detected for the ager.
Sync Manager. (AL-
Status Code: 0016
hex)
An error was • An error was detected in the
detected in the RxPDO settings.
RxPDO settings.
(AL-Status Code:
001D hex)
An error was • An error was detected in the
detected in the TxPDO settings.
TxPDO settings.
(AL-Status Code:
001E hex)
An incorrect PDO • An incorrect PDO WDT setting
WDT setting was was detected.
detected. (AL-Sta-
tus Code: 001F
hex)
An SM Event Mode • An SM Event Mode that is not
that is not sup- supported was set.
ported was set.
(AL-Status Code:
0028 hex)
An incorrect TxPDO • An incorrect TxPDO was set,
was set. (AL-Status e.g., the index, subindex, or
Code: 0024 hex) size was outside of the allow-
able range.
An incorrect • An incorrect RxPDO was set,
RxPDO was set. e.g., the index, subindex, or
(AL-Status Code: size was outside of the allow-
0025 hex) able range.
An incorrect state • An incorrect state transition
transition request request was received.
was received. (AL-
Status Code: 0011
hex)
An unclear state • An unclear state transition
transition request request was received.
was received. (AL-
Status Code: 0012
hex)
When DC Mode • When DC Mode was confirmed,
was confirmed, the the cycle time was set to a
cycle time was set value that made operation
to a value that impossible.
made operation
impossible. (AL-
Status Code: 0035
hex)
A fatal error • An error occurred in the soft-
occurred in an NX ware.
Unit.
An error occurred in • An NX Unit is not mounted
I/O data communi- properly.
cations with the NX
• An NX Unit has failed.
Units.
Level
Maj Prt Min Obs Info
S
S
S
S
S
S
S
S
S
S
S
S
NJ/NX-series Troubleshooting Manual (W503)
Reference
W519
W519
W519
W519
W519
W519
W519
W519
W519
W519
W519
W519