Omron NX701-17 Series Troubleshooting Manual page 115

Event code Event name
54012404 hex
File Number Limit
(Ver. 1.08 or
Exceeded
later)
54012405 hex
Directory Does Not
(Ver. 1.08 or
Exist (FTP)
later)
54012406 hex
FTP Server
(Ver. 1.08 or
Connection Error
later)
54012407 hex
Destination FTP
(Ver. 1.08 or
Server Execution
later)
Failure
54012408 hex
SD Memory Card
(Ver. 1.08 or
Access Failed for
later)
FTP
54012409 hex
Specified File
(Ver. 1.08 or
Does Not Exist
later)
5401240A hex
Specified File Is
(Ver. 1.08 or
Write Protected
later)
NJ/NX-series Troubleshooting Manual (W503)
Meaning
• The number of files
The number of files
specified with a wildcard for
an FTP client
communications instruction
exceeded 1,000.
The directory specified for • The directory specified
an FTP client communica-
tions instruction does not
exist in the Controller or an
incorrect path was speci-
fied.
• The destination FTP
The destination FTP server
that was specified for an
FTP client communications
instruction does not exist
on the network or the
specified FTP server is not
• The destination FTP
operating.
• The destination FTP
The destination FTP server
for an FTP client
communications instruction
returned an error.
• An SD Memory Card
SD Memory Card access
from the FTP client failed.
• The SD Memory Card
• The capacity of the SD
• The SD Memory Card
• A file specified for an
A file specified for an FTP
client communications
instruction does not exist.
• The data was not
The data was not
transferred because the
FTP client communications
instruction was set to not
overwrite files with the
same name.
Assumed cause
Maj Prt
specified with a file
name that contained a
wildcard for an FTP
client communica-
tions instruction
exceeded 1,000.
for an FTP client com-
munications instruc-
tion does not exist in
the Controller or an
incorrect path was
specified.
server that was speci-
fied for an FTP client
communications
instruction does not
exist on the network.
server that was speci-
fied for an FTP client
communications
instruction is not oper-
ating.
server for the FTP cli-
ent communications
instruction failed to
execute the requested
processing.
is not inserted.
was removed during
execution of the FTP
client communica-
tions instruction.
Memory Card is insuf-
ficient.
is write protected.
FTP client communi-
cations instruction
does not exist.
transferred because
the FTP client commu-
nications instruction
was set to not over-
write files with the
same name and a file
with the specified file
name already existed
at the destination.
3 Error Tables
Level
Refer-
ence
Min Obs Info
S W502
S W502
S W502
S W502
S W502
S W502
S W502
3-37
3