Omron NX701-17 Series Troubleshooting Manual page 125

Event code Event name
54015459 hex Motion Control
Instruction Re-exe-
cution Disabled
(Master Axis)
5401545A hex Motion Control
Instruction Re-exe-
cution Disabled
(MasterOffset)
5401545B hex Motion Control
Instruction Re-exe-
cution Disabled
(MasterScaling)
5401545C hex Motion Control
Instruction Re-exe-
cution Disabled
(MasterStartDis-
tance)
5401545D hex Motion Control
Instruction Re-exe-
cution Disabled
(Continuous)
5401545E hex Motion Control
Instruction Re-exe-
cution Disabled
(MoveMode)
5401545F hex Illegal Auxiliary
Axis Specification
54015460 hex Illegal Axis Specifi-
cation
NJ/NX-series Troubleshooting Manual (W503)
Meaning
An attempt was made to • A parameter for an
change the parameter for
the Master input variable
when re-executing a motion
control instruction. (This
input variable cannot be
changed when re-execut-
ing an instruction.)
An attempt was made to • A parameter for an
change the parameter for
the MasterOffset input vari-
able when re-executing a
motion control instruction.
(This input variable cannot
be changed when re-exe-
cuting an instruction.)
An attempt was made to • A parameter for an
change the parameter for
the MasterScaling input
variable when re-executing
a motion control instruction.
(This input variable cannot
be changed when re-exe-
cuting an instruction.)
An attempt was made to • A parameter for an
change the parameter for
the MasterStartDistance
input variable when re-exe-
cuting a motion control
instruction. (This input vari-
able cannot be changed
when re-executing an
instruction.)
An attempt was made to • A parameter for an
change the parameter for
the Continuous input vari-
able when re-executing a
motion control instruction.
(This input variable cannot
be changed when re-exe-
cuting an instruction.)
An attempt was made to • A parameter for an
change the parameter for
the MoveMode input vari-
able when re-executing a
motion control instruction.
(This input variable cannot
be changed when re-exe-
cuting an instruction.)
The axis specified for the • An axis does not exist
Auxiliary input variable to a
motion control instruction
does not exist.
The axis specified for the • An axis does not exist
Axis input variable to a
motion control instruction
does not exist.
Assumed cause
Maj Prt
input variable that
cannot be changed for
re-execution was
changed.
input variable that
cannot be changed for
re-execution was
changed.
input variable that
cannot be changed for
re-execution was
changed.
input variable that
cannot be changed for
re-execution was
changed.
input variable that
cannot be changed for
re-execution was
changed.
input variable that
cannot be changed for
re-execution was
changed.
for the variable speci-
fied for the Auxiliary
input variable to the
instruction.
for the variable speci-
fied for the Axis input
variable to the instruc-
tion.
3 Error Tables
Level
Refer-
ence
Min Obs Info
S W502
S W502
S W502
S W502
S W502
S W502
S W502
S W502
3-47
3