Omron NX701-17 Series Troubleshooting Manual page 101

Event code Event name
34130000 hex FINS/TCP
Connection
Table Setting
Error
34110000 hex Unknown
Destination
Node
80100000 hex Packet Dis-
carded
80110000 hex Packet Dis-
carded
NJ/NX-series Troubleshooting Manual (W503)
Meaning Assumed cause
The FINS/TCP con- • The power supply to the Con-
nection table is troller was interrupted or com-
incorrect. munications with the Sysmac
Studio were disconnected while
downloading the FINS/TCP
connection table.
The send destina- • The send destination node was
tion node is not not found when a FINS mes-
known. sage was sent.
One or more pack- • A FINS response addressed to
ets were discarded. the CPU Unit was received.
• The send designation Unit for
the FINS response does not
exist.
One or more pack- • An attempt was made to send a
ets were discarded. FINS response with over 2002
bytes.
• An attempt was made to route a
FINS response with over 2002
bytes.
• Packet was received with a No
Such Unit routing error.
• Packet was received with a
Routing Error routing error.
• Packet was received with a No
Routing Table routing error.
• Packet was received with an
Event Area Size Over Limit
routing error.
• There is insufficient space in
the internal buffer.
• FINS message routing failed
because the communications
load is too high.
3 Error Tables
Level
Maj Prt Min Obs Info
S W501
S W501
S W501
S W501
Reference
3
3-23