Installing A Ptx Series Pic Air Filter; Figure 155: Installing A Pic Air Filter - Juniper PTX5000 Hardware Manual

PTX5000 Packet Transport Router Hardware Guide

Installing a PTX Series PIC Air Filter

Related
Documentation
278
To install the PIC air filter (see
To prevent damage to the equipment caused by static discharge, attach an
1.
electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the
strap to one of the ESD points on the chassis.
Place the air filter in the air filter cover.
2.
Reinstall the air filter cover on to the PIC faceplate.
3.
Tighten the thumbscrews that secure the air filter cover to the PIC faceplate.
4.

Figure 155: Installing a PIC Air Filter

1— Air filter cover
2—Air filter
Figure 155 on page 278):
3— Air vent
Copyright © 2017, Juniper Networks, Inc.